
Advanced Engineering Plastics (PEEK / PEKK / Vespel™)
- Elimination of lubrication enabling dry running
- Reduced wear on mating parts
- Reduced friction providing faster operating speeds
- Lower torque values resulting in reduced power consumption
- Improved corrosion and chemical resistance
- Compliance with industry specifications such as Norsok M-710
DMR Seals understand that choosing the correct advanced engineering plastic for your application can sometimes be tough. By taking careful consideration of your application conditions, such as temperature, load, speed and chemical compatibility, this process can be made much simpler and provide you with the full benefits of using these materials. Please contact our technical team should you require any help choosing the correct material for your application or if the material you require is not shown.
Material Range
Data Sheet
Temperature
Min: —
Max: +250°C
Min: -50°C
Max: +260°C
Min: —
Max: +260°C
Min: —
Max: +260°C
Min: —
Max: +260°C
Min: —
Max: +260°C
Min: —
Max: +260°C
Min: -50°C
Max: +250°C
Min: -50°C
Max: +250°C
Min: -50°C
Max: +250°C
Min: -50°C
Max: +250°C
Min: -50°C
Max: +260°C
Min: -50°C
Max: +260°C
Min: -50°C
Max: +260°C
Min: —
Max: +230°C
Min: —
Max: +230°C
Hardness
88 Shore D
82 – 90 Shore D
89 – 91 Shore D
89 Shore D
85 Shore D
89 Shore D
89 Shore D
78 Shore D
82 Shore D
80 – 85 Shore D
85 Shore D
85 Shore D
85 Shore D
85 Shore D
85 Shore D
88 Shore D
Description
A high-performance unreinforced virgin PEEK material with excellent thermal resistance, high compressive strength, low wear properties and low creep values.
A high-performance Norsok M710 compliant unreinforced virgin PEEK material with excellent thermal resistance, high compressive strength, low wear properties and low creep values.
Approvals: Norsok M-710 compliant
A high-performance carbon fibre reinforced PEEK material with excellent thermal resistance, high compressive strength, low wear properties and low creep values.
A high-performance carbon fibre reinforced PEEK material with excellent thermal resistance, high compressive strength, low wear properties and low creep values.
Approvals: ISO 10423 Appendix F.1.13.5.2 (API 6A)
A modified PEEK which has been reinforced with fillers of Carbon Fibre and Lubricants. This provides the material with excellent thermal resistance, higher compressive strength, lower wear properties and lower creep values.
A high-performance glass fibre reinforced PEEK material with excellent thermal resistance, high compressive strength, low wear properties and low creep values.
A high-performance Norsok M710 compliant glass fibre reinforced PEEK material with excellent thermal resistance, high compressive strength, low wear properties and low creep values.
Approvals: Norsok M-710 compliant
A high-performance PTFE lubricated PEEK material with excellent sliding ability, excellent thermal resistance, high compressive strength, low wear properties and good chemical resistance.
A high-performance unreinforced virgin PEEK material that has been pigmented black in colour. It has excellent thermal resistance, high compressive strength, low wear properties and low creep values.
A high-performance Norsok M-710 compliant virgin PEEK material which has been modified with a black pigment. It has excellent thermal resistance, high compressive strength, low wear properties and low creep values.
Approvals: Norsok M-710 compliant
A high-performance graphite reinforced PEEK material that provides enhanced mechanical properties and reduced coefficient of friction values.
A high-performance black pigmented PEEK material that is suitable for medical applications and has excellent resistance to hydrolysis, superheated steam and is particularly useful for steam autoclaving.
A high-performance black pigmented PEK material (commonly referred to as PEEK-HT or Victrex HT™) that is suitable for high temperature applications requiring increased compressive strength and wear resistance while under high thermal load.
A high-performance black pigmented PEKEKK material (commonly referred to as PEEK-ST or Victrex ST™) that is suitable for high temperature applications requiring increased mechanical properties while under high thermal loads.
A high-performance unreinforced virgin PPS (Polyphenylensulfide) material that was developed to bridge the gap between general engineering plastics such as POM/Nylon and the more advanced engineering plastics such as PEEK.
A high-performance glass fibre reinforced PPS (Polyphenylensulfide) material that was developed to bridge the gap between general engineering plastics such as POM/Nylon and the more advanced engineering plastics such as PEEK.